top of page



Four-layer filtration

≥95% particulate filtration

Made in Canada

Ear loop design

Ideal for children or adults with smaller faces


The ECAE96 flat fold respirator is a smaller version of our new Made in Canada mask focused on safety and convenience. With four layers of protection, and 95PFE, we offer this mask for children or adults with a smaller face size.


Foldable, lightweight design with ear loops allow portability, hygiene, and ease of applying and removing.


Materials include non-woven meltblown polypropylene (two layers) for filtration. Free of graphene and latex.


Manufactured in BC, Canada by Eternity Medical Equipment Manufacturer, a Health Canada MDEL license holder


Easy breathing: very low inhalation and exhalation resistance (TSI Test Report)

Particle Filter Efficiency (PFE) >95% (Test Report)


Note: These masks are not NIOSH N95. These masks achieve >95% particulate filtration efficiency in the test samples using the NIOSH standard procedure TEB-APR-STP-0059 (Test Report)


Earloops do not meet the headband requirement of NIOSH N95


Dispose after 8 hours of accumulated use (e.g. one 8-hour school day, or eight 1-hour trips to the store)


Please ensure adequate seal against the face. If respirator does not seal, discontinue use.

Made in Canada

ETERNITY | Flat Fold Respirator Kids size 2 boxes(20 pcs/box)

C$46.99 Regular Price
C$22.99Sale Price
  • Wear:

    • Clean your hands before touching the mask. 
    • Open the upper and lower folded parts of the mask.
    • Hang the mask over your ears.
    • Adjust the bridge of the nose to fit the nose.
    • Adjust the lower part of the mask, close to the chin or cover the chin.
    • Adjust the mask body to fit around the face.
    • After wearing the mask, take a few breaths and test. If the mask fluctuates inward and outward with breathing, it means that it is worn correctly.



    • Clean your hands before touching the mask.                    
    • Hook the ear straps on both sides with your fingers, remove the mask, and put it in a specific recycling container
    • Clean your hands.


    Take special care                                                                                     

    • Not to touch the body of the mask that may be contaminated.         
    • Dispose after 8 hours of accumulated use   
    • If you need to enter a contaminated area or a potential area,  it is recommended that you wear our 95PFE-L3 ( Model:ECAN95 ,Ccupational Health & Safety Surgical Non-Powered Air-Purifying Respirator. Approved by Health Canada, CSA and CE. ).
  • Eternity Medical Equipment Manufactural Inc
    Address: 103-19099 25th Ave, Surrey BC VZ3V2 Canada
    Tel: +1 604 385 6098,+1 800 480 7155

bottom of page